From the HBD Archive
From: R_GELINAS@UNHH.UNH.EDU (Russ Gelinas)
Subject: Kegging
Date: 1992-03-02 16:13:44 GMT

Well I finally had someone knowledgeable take a look at my keg, and
the prognosis is very good. The only concern is the relief valve in
the cover. There doesn't seem to be any way to engage it; it has no ring
to pull. I took it apart, and it seems that it might release if you press
on the top of it with a pointed object. I tried that with the keg
pressurized, but nothing happened. Is the valve defective, or is that
just the way they work? The Foxx catalog has replacement valves, but
to get a ring-pull valve I'd have to replace the whole cover.
Actually there's another concern: there's no check valve for the
regulator. Foxx doesn't seem to have them. Could some kind soul point
the way to someone who does? Thanks.

Russ (btw, the Wyeast package that was about to burst did *not*)

Back New Search

The posts that comprise the Homebrew Digest Searchable Archive remain the property of their authors.
This search system is copyright © 2008 Scott Alfter; all rights reserved.