From the HBD Archive
From: eisen@kopf.HQ.Ileaf.COM (Carl West)
Subject: Cleaning hop residue
Date: 1992-06-30 15:23:25 GMT

Bob,

Run a long string or rope through the tube (use a weight or stream of
water to help if necessary), tie a piece of cloth into the middle of
the rope, (make sure that the cloth is big enough to make a tight fit
in the tube), stand on one end of the rope, hold the other end up high
in your hand and with the other hand move the tube up and down thus
scrubbing the inside of the tube. You could use a bottle or carboy
brush for this instead of the cloth. Cheaper than those brushes is
taking apart a _new_ toilet brush, straighten the bristle-wire out and
pull that through the tube.

Works on mine.

Carl

WISL,BM.

Back New Search

The posts that comprise the Homebrew Digest Searchable Archive remain the property of their authors.
This search system is copyright © 2008 Scott Alfter; all rights reserved.